Translations:Kalupi za čokolado/62/en

1. Turn on the vacuum cleaner.
2. Place the object on the perforated platform.
3. Heat the plastic sheet with the hot air gun, moving the heat around to avoid burning the material. Do not overheat – some plastics become white and brittle if overheated. Therefore, experiment with the material and heating time. Don't worry if it's not perfect the first time – try several times!
4. Also try different types of plastic – plastic plates often work well, but the result depends on the material.
5. When the plastic is soft and pliable, quickly place it over the object.
6. Let it cool before removing the mold.